B P Refcool

Description

Ecoab Flaring Needle (EB-900F) drill bit set with 1/4'' 3/8'' 1/2'' 5/8'' 3/4" bits for soft copper and aluminum tubing made for the most common tubing diameter in hvac, this flaring needle tool preserve copper's/aluminum's malleability while doing the flaring, avoiding cracks and leakage. Features: 5 pieces set with the most common hvac tubing diameters revolutionizing system for molding tubes using heat by friction way more surface of contact between the flare and the valve right flaring size, every single time up to 10x faster than the conventional tools: flares in 5 seconds preserves copper/aluminum malleability while doing the flaring, avoiding cracks and leakages drill minimum requirements the ecoab tools are made to work along with drills and/ or screwdrivers, with minimum of 1,800 RPM and 500 watts for corded drills, or and 1,800 RPM and 18v, or, for cordless drills. Using the spin tools along with less powerful equipment may result in high decrease of performance. Tubing wall thickness the flaring needle tools are made to work with copper tubing of 1/4'', 3/8" and 1/2'' with wall thickness of up to 0.8Mm, and up to 1.0Mm for the 5/8'' tubing diameters.

ECCENTRIC FLARING TOOL

This precision tool provides smooth, uniform flares with minimum effort. Hardened steel flaring cone, eccentrically mounted in needs bearings, produces rolling action for even metal flow. Handle clutch releases when flare is complete to iron and smooth flare. Off-center hardened steel cone with 45° flare produces a rolling action for uniform flare walls without galling in 1/4″ to 3/4″ O.D. tubing. Large feed screw handle for smooth turning with little effort. Black oxidefinished steel flaring bars are heat-treated for durability and secure grip on tubing. Recommended for soft materials such as copper and aluminum. Built-in clutch release to prevent over-torking

JUMBO FLARING TOOL
This precision tool provides smooth, uniform flares with minimum effort. Hardened steel flaring cone, eccentrically mounted in needs bearings, produces rolling action for even metal flow. Faceted, hard chrome-finished cone rolls out perfect 45 flares above die block- then automatically burnishes flare face. Insert tubing into adjustable opening of tube holding assembly. Position end of tubing approximately 1/8” above the surface of the holder. Tighten clamp screw approximately ½ to ¾ of a turn beyond free travel position to square tubing. Be certain flaring cone surface is oiled. Slip yoke over tube holding assembly centerring on tubing. Twist yoke clockwise to lock in position. Turn yoke handle clockwise to flare.

Flaring Size 3/16", 1/4", 5/16", 3/8", 1/2", 5/8". made up of Aluminium Alloy. Brand ECOAB

The aluminium body of the YELLOW JACKET flare and expansion tool is only half as heavy as conventional steel structures. Lightweight and portable 45° SAE flare quick connection at the yoke•Built-in slide gauge to easily meet desired flare sizes without the guesswork.•Six quick-change positions for crimping soft copper and aluminum tubes•The chrome plated surface of the bolts allows easy pressing•Strong aluminum rods - tested more than 1000 times.
•A yoke for crimping and expanding work•Blow molded transport box included

GRABBER FLARING TOOL
This precision tool provides smooth, uniform flares with soft copper, aluminum and brass tubing. Faceted, hard chrome-finished cone rolls out perfect 45 flares above die block- then automatically burnishes flare face. Insert tubing into adjustable opening of tube holding assembly. Position end of tubing approximately 1/8” above the surface of the holder. Tighten clamp screw approximately ½ to ¾ of a turn beyond free travel position to square tubing. Be certain flaring cone surface is oiled. Slip yoke over tube holding assembly centerringon tubing. Twist yoke clockwise to lock in position. Turn yoke handle clockwise to flare.

FLARING TOOL Precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing. A hardened, smooth cone provides fast, 45° flares either single or double lap. A single clamp screw allows easy clamping and removal of tubing. Heavy duty is designed for tight spaces. Designed to flare on tubing up to 5/8 inch. Hardened steel flaring bar to resist tube slippage. Forged steel yoke that slips over bar and locks with a turn. Precision threaded feed screw and long handle Chrome finish. Box pack

This combination tool both flares and swages soft or annealed copper and similar materials. Hardened and plated alloy steel adapters are interchangeable to convert sizes and functions. Slip-on self-centering steel yoke has a feed screw with extra long handle, Deeply knurled adapters. Flaring bars are hardened and chrome plated for durability. Precision designed tool for producing 45 flares in soft copper, brass, aluminum and mild steel tubing. A hardened, smooth cone provides fast, 45 flares either single or double lap. Designed to flare on tubing up to 3/4 inch. Kit comes complete with swage adapters, flaring cone, two flaring bars, yoke and a deluxe box case.

The aluminum body of the YELLOW JACKET Crimping tool is only half as heavy as conventional steel structures. For superfast beading, remove the upper handle and replace it with an electric drill drive. Only for use with a drill Torque adjustment function.

Constructed for the new R-410A system requirements•Self-centering yoke handles without damaging or constricting the tube.•Automatic tube height gauge for correct tube height•Multi-faceted bluing cone produces a burnished Crimp fit for a positive seal•Made in the USA

A 45 ° tapered, hardened steel eccentric cone produces rolling with uniformly crimped walls, with no roughening of 3/16" to 3/8" pipes 3/4 inch O.D.•Large feed screw handle for a smooth rotation with little effort•Recommended for soft materials such as copper and aluminum•Built-in clutch release to prevent torque overshoot.

•Universally constructed bracket holds all tubes with inch and metric sizes up to 5/8"•Crimp bar is compact and easy to use in confined spaces•Multi-faceted cone produces a 45° Precision flare and burnishes at the same time•Flare is formed above flare bar

•Six hardened and coated alloy steel adapters are interchangeable for size and function conversion.•Attachable, self-centering steel yoke with feed spindle with particularly long handle.•Deep-knurled adapters.•Kit comes complete with six swage adapters, flaring cone, two flaring bars, yoke and a deluxe case•Made in the USA