B P Refcool

Manifolds and hoses specifically for transcritical CO2 applications (R-744).•The Transcritical CO2 Inspection and Filling Fixture is constructed with a forged aluminum alloy housing, which makes it lightweight and easy to handle.•Fourth hose enables connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump for diagnostics, evacuation and charging without switching hoses•3/8“ vacuum connection for using a larger hose to cut evacuation time by up to 33% (all other ports are 1/4 inch)•No sight glass means extra security. With genuine 45° SAE torch hoses, 78 inches (200 cm) long.

The YELLOW JACKET® Heat Pump Manifold features two 800 psi gauges to read all heat pump pressure conditions. Traditional low side manifold gauges can be susceptible to damage when heat pumps go into heating mode. Because the low side gauge of the YELLOW JACKET Heat Pump Manifold is also designed for pressures up to 800 psi, it can read the pressure whether the pump is in heating mode, cooling mode or transition. 

Features

• Large 3-1/8” gauges feature black steel cases with polycarbonate crystal 
• High- and low-side gauges read up to 800 psi 
• Larger dials are bold and easy to read 
• Dials with 1% accuracy (Class 1) full scale movement provide the level of accuracy necessary for critical charge systems 
• Proven sliding double “O”-ring pistons reduce wear 
• Long life nylon seats 
• Forged brass body for durability 
• Full porting maximizes capacity and flow 
• Full-size metal valve handles for easy operation 
• Hose assemblies UL recognized for 4000 psi (275 bar) burst and 800 psi (55 bar) working pressure (File # SA9737) 
• Made in USA 

Cast iron body and metal handles with full size•Dual temperature/pressure gauge R717 with bar with °C and °F bar/psi ammonia scales
•Finger-tight one-piece valve stem for positive seal on nylon seat
Use only with NH3 rated hoses
Made in the USA

Forged Aluminium Alloy body makes this unit lightweight for handling ease with the durability and reliability required for repeated use.

Features:

• Large, easy-to-read 3-1/8′′ (80 mm) steel case red and blue, 1% Accuracy (Class 1) gauges
• Front access for easy field recalibration
• Double “O” ring piston for reliability and long service life
• Exclusive 100 mesh filter in-line on all flare fittings helps keep out particulate
• material and extend the life of the seats
• Contoured easy-grip handles for positive control; colour-coded for ready
• identification
• Sight glass to easily view refrigerant movement and condition during charging and recovery
• Heavy duty hook won’t pull out
• Manifold and hose holder fittings all 1/4′′ unless otherwise identified
• Made in the USA

Series 41 Manifolds With 2-1/2′′ Gauges

• Flutterless technology means surge protector and silicone dampened movement helps minimize needle pulsation for easier, more accurate readings
• Sliding double “O” ring pistons reduce wear
• Easy-to-read 2-1/2′′ (63.5 mm) steel case gauges with 3-2-3% accuracy
• Limited lifetime warranty on manifold bar and valves – not gauges. See warranty information for details

Comes with the same features and benefits as the TITAN™ 4-valve unit but without the fourth hose. All fittings 1/4" unless otherwise noted.•Exclusive in-line mesh filters of size 100 on all flare connections keep out particulate material and extend the life of the seats.•Sight glass for easy view of refrigerant flow and condition during charging and recovery•Made in the USANH3

    Description

• Finger-tight one-piece valve stem for positive seal on nylon seat
• Easy, accurate valve adjustment
• Use only with NH3 rated hoses.
• This heavy duty manifold features cast iron body and full size metal handles. Dual temperature/pressure R717 gauge has bar with °C and psi with °F ammonia scales.
• Made in the USA