B P Refcool

Easily remove worn gaskets from hoses and replace with new gaskets. Sharp, angled pick is long enough to pull the gasket from deep inside the hose. Notch on the opposite end of the pick for placing the depressor inside the hose.

Pick stores inside case along with five CH20 gaskets (included) for protection and safety.

PINCH OFF PLIER

Pinches off copper and other lines quickly.

CODE - EB-201B

SIZE (INCH)-  ≤1/4

Coendurol D-ICE is non toxic, non flammable and non-corrosive de-icing liquid which have been specially formulated for melting ice and clear surface visibility for all type of surfaces (metals, plastic or composite material). D-ICE removes ice from the freezer or deep freezer easily and super fast, so the frozen food doesn’t get a chance to defrost.

Ice accumulation in freezer acts as thermal insulator, cooling system needs to run longer in-order to maintain the required temperature and hereby increases energy consumption. Using DICE on a regular basis reduces ice formation to a minimum, which saves costs due to lower energy consumption.

APPLICATIONS

• Domestic refrigerator
• Industrial and commercial Freezers
• Deep / Chest freezer
• Display counter
• Cold Rooms
• Biomedical Freezer
• Blast Freezer etc.

KEY BENEFITS

• Easy to use
• Non corrosive
• No deposition of salts
• Works up to -30°c
• No tool required
• Easy to clean

DIRECTION FOR USE

• Turn off the freezer.
• Empty content (frozen food).
• Remove easy to remove ice.
• Spray D-ICE on remaining ice evenly and wait for 5-10 min.
• scrap away any losses ice.
• Repeat spray of D-ICE if required.
• Remove Ice, clean and dry inside walls.
• Freezer can be switched on, ready for use.

The Ecoab Solenoid Valve Operating Magnet is designed to convert electrically operated solenoid valves into hand-operated valves in seconds to enable service engineers to operate valves manually. The magnet greatly assists during the installation process, recovery of refrigerants, commissioning and re commisioning of plant and machinery.

KEY FEATURES:
• Size to fit most application (18mm)
• Handy pocket-size
• Easy to use and time saving
• Permanent magnet moulded in ABS Plastic
• Safe design that fits all makes of solenoid valve.

Use this solenoid service magnet to test, troubleshoot, or manually activate and control a direct connected or pilot operated 2-way solenoid, 3-way reclaim or 4-way reversing valve.

The YELLOW JACKET Solenoid Valve Service Magnet is the quickest and easiest way to manually operate solenoid valves. It works by magnetically lifting the stem assembly and plunger to actuate the valve during service.

Test and Control
Use this solenoid service magnet to test, troubleshoot, or manually activate and control a direct connected or pilot operated 2-way solenoid, 3-way reclaim or 4-way reversing valve typically found in a reverse cycle air conditioner or heat pump.

Recovery and Evacuation
This magnet can also be used to hold a solenoid valve open during recovery and evacuation so the entire system can be accessed.

Other Uses
 Use in place of the power head on a hot water oil shutoff valve to eliminate the need to wait for the delay on open.

 Use it to temporarily replace faulty coil to open solenoid valve.

 Use it to turn the power on or replace the solenoid if it’s bad.